Simple Land Rover

Do you want to design your own land rover or robot car? Then here it is. Here we used 4 switches and 4 motors to make the land rover. This land rover works on the following table.

SW1	SW2	SW3	SW4	MOTION
ON	ON	OFF	OFF	Forward Motion
OFF	OFF	ON	ON	Reverse Motion
ON	OFF	ON	OFF	Left Turn
OFF	ON	OFF	ON	Right Turn

For motors use D.C. motors. Use the aluminium or any low weight sheet to cover the land rover from top side ( Red colour part in below diagram ). Select switches which turn on by pressing and when you release the pressure the switch will be off. This kind of switches will be better for this project otherwise you can choose your own.

CIRCUIT DIAGRAM

• Tweet
• Share
• Share
• Share
• Share

Related Post

• Solar Charger for 6V 4.5Ah Battery Here is a solar charger circuit that is used to charge Lead Acid or Ni-Cd batteries using the sola
• Air flow detector circuit This circuit can give a visual indication of the rate of air flow.It can be also used to check whe
• Motorbike Alarm This simple-to-build alarm can be fitted in bikes to protect them from being stolen. The tiny circ
• Water Sensing Indicator This is a simple circuit for sensing the water. It consists one DC battery, a resistor and a speak